Coeur d'Alene Airport · KCOE · Hayden, Idaho
Dry Ice Cleaning & Blasting · Automotive Restoration · Aircraft Services
Request ServiceAbout
Aerodrome Restorations is a specialty shop at Coeur d'Alene Airport, serving Spokane, North Idaho, and Eastern Washington. We're built around the tools and expertise to do high-quality work on the machines that matter most — classic cars, performance vehicles, and aircraft.
We're not a volume shop. We're here for owners who care about their equipment and want the job done properly the first time.
| Location | 2749 W Sky Hawk Ln, Hayden, ID |
| Airport | Coeur d'Alene Airport (KCOE) |
| Phone | 208-929-5058 |
| Services | Dry Ice Cleaning, Media Blasting, Automotive, Aircraft, Undercoating, Ceramic Coating |
| Dealership | Authorized Driven Racing Oil Dealer |
| Network | Trained DRYCE® Nation Member |
| Region | PCA Inland Northwest |
| Service Area | Coeur d'Alene, Post Falls, Hayden, Sandpoint, Spokane, Spokane Valley, Liberty Lake, Missoula, Kalispell |
What We Do
Every job here runs in the same order — get it clean down to sound material, put right whatever needs restoring, then protect it so it stays that way. You can come in at any point in that sequence. Most people start at the beginning.
Clean Step One
Non-abrasive, non-toxic, and completely dry. We use the ICS 410S with 480 gallons of on-site air storage to clean engine bays, undercarriages, aircraft interiors, and industrial equipment — without disassembly or water damage risk. Aerodrome is a member of DRYCE® Nation, the automotive dry ice cleaning community whose members are fully trained in proper dry ice cleaning techniques, with shared access to the field's leading methods and equipment.
Precision media blasting for restoration parts — suspension components, brackets, hardware, and castings. We run a Trinco dry blast cabinet backed by the same high-volume dry air that runs everything else in the shop. Parts come out as clean bare metal, ready for paint, powder, or coating.
Restore Step Two
Maintenance and restoration work for Porsche, classic cars, and performance vehicles. Two Nussbaum lifts, an enclosed curtain booth with exhaust filtration, and a focus on the details that separate a good job from a great one.
On-site at KCOE with direct ramp access. We work on general aviation aircraft with the same attention to detail we bring to everything else. Fly in, get the work done. 35+ years as an A&P/IA.
Protect Step Three
Corrosion protection for vehicles that live where the roads get salted. We apply DINITROL 4941 underbody coating in black or clear, plus DINITROL ML and 1000 cavity waxes injected into rocker panels, frame rails, doors, and box sections — the places rust starts where you can't see it. Applied over a dry ice–cleaned chassis, so the coating bonds to clean metal instead of sealing grime underneath it.
Supplier and installer of KSL Ceramic undercarriage coating, applied in-house at the hangar. Protects chassis, floor pans, and suspension components against road salt, moisture, and debris — for classics, performance vehicles, and daily drivers alike. The ceramic option when you want a harder-wearing surface finish than a wax-based undercoat.
Featured Work
Dry ice cleaned and finished with KSL Ceramic Coating, front to back. This is the actual undercarriage after the work — not a stock photo.
Wheel Well · Liner Removed
Wheel Well · Detail
Rear Subframe · Fully Exposed
Commercial & Agricultural
The same dry ice equipment that strips an engine bay does the same job on machinery, tanks, conveyors, and equipment that can't come apart or get wet. We work on industrial machines, farm equipment, and food processing equipment — on-site at the hangar, or on-site at your facility when the job is too large to move. Call for a quote.
Grease, oil, carbon buildup, and product residue removed from machinery, tanks, conveyors, and processing lines — without water, solvents, or teardown. Safe around electrical components and sensitive tooling. We travel to your facility for equipment too large to move, or you can bring smaller components to the hangar.
Corrosion protection for equipment that lives outdoors or takes regular wash-down — farm machinery exposed to weather, food processing equipment cleaned with caustic or acidic wash-downs, tanks, frames, and structural steel. Applied after a dry ice clean, so the coating bonds to sound metal instead of sealing in existing grime or corrosion.
The Shop
The equipment we run isn't an accident. Every piece was chosen because it does the job without compromise. Dry ice at pressure, proper lifts, clean air. That's the baseline — everything else follows from there.
Authorized Dealer
Driven Racing Oil is engineered for performance engines — developed on the track and refined for street use. As an authorized dealer, we stock the oils your engine actually needs, not whatever's on the shelf at the parts store.
We stock three formulations covering air-cooled Porsches, modern engines, and direct injection applications. Additional products available by request.
Air-Cooled Porsche
Purpose-formulated for air-cooled engines that run hot and demand proper film strength. The right oil for 911s, 356s, and classic Porsches.
Most Modern Engines
High-performance formulation for most naturally aspirated and turbocharged engines. What should be in your engine instead of conventional oil.
Direct Injection Engines
Developed for the demands of direct injection engines — carbon deposit prevention, piston cleanliness, and full-film protection under high-load conditions.
Available at the hangar. Stop by KCOE or call ahead and we'll have your oil ready. Not sure which formulation is right for your engine? We can help you figure that out.
Call 208-929-5058Clientele
Air-cooled and water-cooled Porsche, BMW, Audi, and other European makes. We know what these cars need and stock the right oil to match.
Media blasting strips brackets, castings, and suspension parts to bare metal and ready for paint, powder, or coating. Restoration work and Driven Racing Oil round out the build.
Mid-size trucks and SUVs — 4Runners, Tacomas, Wranglers, and similar platforms. Dry ice cleaning clears trail grime without water near your electronics; DINITROL seals the undercarriage back up before the next trip.
Restoration, maintenance, and dry ice cleaning for vehicles that deserve more than a generic shop.
General aviation services on-site at KCOE. Fly in direct — no trailering, no logistics headaches.
Across North Idaho, Spokane, Eastern Washington, and Western Montana. If you care about your machine, we're your shop.
On YouTube
Life at the airport — the work, the machines, the culture. CDA Hangar Life documents what happens at KCOE and the kind of work we do, from the ground up.
Follow along if you want to see what a real shop looks like.
Watch on YouTubeFind Us
Address
2749 W Sky Hawk Ln
Hayden, ID 83835
Airport
Coeur d'Alene Airport (KCOE)
47°46′28″N 116°49′18″W
Phone
Hours
| Monday – Friday | By Appointment |
| Saturday | By Appointment |
| Sunday | Closed |
We work by appointment to give every job proper attention. Call or use the contact form to schedule.
Common Questions
It depends entirely on the vehicle and how far you want to take it. A thirty-year-old truck that has seen every Idaho winter is a different job from a garage-kept 911. We quote after a consultation by phone or in person, and everything runs by appointment so each job gets proper attention.
Yes. We are on the field at Coeur d'Alene Airport with direct ramp access, so you can taxi to the facility rather than trailering. Call ahead so we can coordinate.
Our lift is rated for mid-size trucks and SUVs, up to about 6,000 lbs loaded — 4Runners, Tacomas, Wranglers, and similar platforms are typically a good fit. Heavily built overland rigs can add real weight with bumpers, racks, and gear, so call ahead with your loaded weight if you're not sure. Full-size trucks, vans, and larger campers are outside what the lift can handle.
Yes. Dry ice cleaning, media blasting, and restoration work apply the same way regardless of badge, and we stock Driven Racing Oil to match. If it's a European car with a job that needs doing right, bring it in.
Yes. Dry ice cleaning works the same way on industrial machinery, farm equipment, and food processing equipment as it does on a car — no water, no chemical residue, and no need to take things apart. We handle smaller components at the hangar and travel to your facility for equipment that can't be moved. Call for a quote.
Spokane and the surrounding Washington communities, North Idaho, Eastern Washington, and Western Montana — including Spokane, Spokane Valley, Liberty Lake, Coeur d'Alene, Post Falls, Hayden, Sandpoint, Missoula, and Kalispell. Work is performed at the hangar at KCOE, roughly 35 minutes from downtown Spokane.
Get In Touch
Phone
Location
Coeur d'Alene Airport (KCOE)
Hayden, Idaho
Service Area
North Idaho · Spokane
Eastern Washington · Western Montana